Cooling Tower, also known in Farsi with the equivalent of the cooling tower, is a type of cooling system through which the heat and heat used in cooling systems are reduced and the water is again cool again. It is.
The cooling tower has a variety of types in terms of performance and structure and its application is very diverse. In most industries today, cooling tower is used. So that it can be considered part of the essential equipment of the industry.
Application of Cooling Tower
As you know, many industrial machines and machines, as a result of excessive activity and energy, are heated over time and emit a lot of heat. This increase in temperature is quite natural. But if not controlled and not adjusted, it may impair and even damage the performance of the above machines. As a result, in most factories and industrial centers, systems are intended to cool these equipment.
In such cases, often overheating the above devices by passing cold water around them. They do. But the point is that the water also receives the heat of the equipment over time and increases the temperature itself. As a result, it is necessary to take measures to cool the water. It is here that different types of cooling tower or cooling tower can be used.
This cooling system is very common and used; In a way that more than 5 % of manufacturing and industrial centers in all countries use it to maintain the proper functioning of their equipment.
It is also interesting to know that coiling tawers by reducing water consumption and saving it as much as possible. Environmental damage controls industrial activities.
It is also worth noting that different types of cooling tower are also used in refineries, power plants, etc.
How Collection Tower Functions
careful examination of this is related to the type of cooling tower; But in general, cooling tawers build a direct or indirect connection between the outdoor air flow by guiding water in certain routes.
By doing so, cool air, excessive heat of the water. It takes it and balances the water temperature. Cooling Tavers can change the water temperature to the ambient temperature and, in some cases, several degrees or more.
, however, how the water transfer and the external air contact method is affected by the structure and type of cooling tower. But all samples of the cooling tower use the general process mentioned to reduce water consumption and increase efficiency.
Why should the tower be balanced?
1. Pressure to the ribs in the tailor tower, which is transmitted by gearbox and transmission shaft.band@| Fan Axial Stimulus Electromotor in Cooling Tower.band@| The blades in severe infertility.
2. ler the entire structure of the system and other defects.ification@|
How is the balance done?
Cooling Tower has anxial fan to long blades, depending on the type of tower depending on the type of tower. Due to the overall form and free diagram, the Balance Cooling Tower is subsidiary of low -speed single -page balance. Depending on the weather and the fan, different balance weights are used for this equipment. The balance machine must be equipped with displacement sensors, which can be used if needed, using this cooling tower.
What are the differences between Koling Tower Balance and Fan Balance?
▪️ Cooling Tavers often have low rotational speeds that reduce the sensitivity of the equipment to the vibration rate. Therefore, the difference between cooling tower balances and other low speed rotary equipment and the flexibility of the vibration analysis for the use of speed and displacement sensors for troubleshooting and balance equipment is one of the essentials of an optimal balance. To be good because it is unclear in what season the employer will order the balance. Six -month -old employer repairs may be in the middle of winter and under the snow and rain.
بی Sensors used for balance should have a proper cable length as the employer's safety officer may allow you to be on cooling tower. Do not give it when launching it. However, most of the time this issue has no particular risk. Unless the balancing responsible uses inappropriate test weights for balance.
▪️ To use the balancing experience if possible, for the upper length of the blades and sometimes the specific sex of the blades, using the balance of the balance expert if possible. In this way, the blades will not suffer the added weight.
▪️ Due to the low speed of the rotary sector, the balance expert must use the appropriate weightlifting policy for cooling tower balance. The adoption of this policy also depends on the type and sex of the blades. If the weights are installed in less diameter, heavier weights should be used, and if they are installed in more diameter, it should be noted that the blades will be the least damage.